Numbers in Seuna

From FrathWiki
Revision as of 23:10, 21 June 2008 by Staigard (talk | contribs)
Jump to navigationJump to search

In Seuna the number system uses base 8.

Zero

Seuna has a symbol for zero(actually similar to our "o" but a bit smaller). It is called space/gap (symbol). It is frequently written but never pronounced when verbally giving strings of numbers.

From 1 to 7

Seuna has 8 symbols that are reserved for the numbers 0 to 7. Seuna numbers are never written out phonetically. It is as if in English you were never allowed to write "one" but must always write "1".

1 aba
2 aga
3 ada
4 ala
5 aca
6 asa
7 aka

There are 6 words that are derived from the above basic numbers. They are used when there is some uncertainty. For example agada could be translated as "two or three" or as "a few", acasa could be translated as "five or six" or as "a few".

If a word begins with ab-, ag-, ad-, al-, ac-, as- or ak-, then that word must be a number.

From 8 to 63

108 abau
208 agau
308 adau
408 alau
508 acau
608 asau
708 akau

As with the basic numbers, the above numbers can be combined. agaudau = "twenty or thirty". There is another form for the above numbers that specifies a range. For example adaua specifies the range 308 to 378

Every number from 1 to 63 has its own unique word which can be worked out from the above tables. For example ;-

agauda = 238

From 64 to 511

1008 abai
2008 agai
3008 adai
4008 alai
5008 acai
6008 asai
7008 akai

As with the other numbers, the above numbers can be combined. For example alaicai = "four or five hundred".

The above set of numbers can also be modified to specify a range. For example alaia specifies the range 4008 to 4778

As with the two digit numbers, every three digit number(i.e. 1 to 511) has its own unique word which can be worked out from the above tables. For example ;-

agauda = 238

acaiba = 5018

alaikausa = 4768

From 512 to 830-1

To express numbers greater than 511, Seuna has a number of exponention terms. These never occur by themselves but must be proceded by one of the numbers 1 to 511. These exponential terms are each written using a single symbol normally used for a consonant. They are in some ways equivalent to the S.I. prefixes kilo, Mega, giga etc..

83 m mu
86 y yu
89 j ju
812 f fu
815 p pu
818 t tu
821 w wu
824 n nu
827 h hu

So for example;-

34y4̴⁓ (pronounced : adaula yu alace) is about* the population of the UK in 2008. Seuna has a special symbol (here represented by "⁓" and pronounced as "ce") which tells us the number is not exact, it is only accurate to three significant figures.

Usually we only deal with approximate numbers. However in some scientific situation you have long and accurately known numbers. For example 34y4̴72m531 (pronounced : adaula yu alaikauga mu acaidauba). In these situations the letters divide the numbers up into sets of three ... a bit similar to how we use comma's to make long numbers easier to read.

* If by some chance, the population of the UK was known to be exactly this number, then it would be represented by 34y4̴- (pronounced : adaula yu alatiki)

From 1 to 8-30-1

Of course there is also a way of representing numbers smaller than one, as well. The table below shows the symbols used for this.

8-3 m mi
8-6 y yi
8-9 j ji
8-12 f fi
8-15 p pi
8-18 t ti
8-21 w wi
8-24 n ni
8-27 h hi

Now you can see the same letter is being used to write exponent values greater than one and also less than one. What is to stop confusion between the two sets ? Well for longish numbers with two or more exponent values, the relative order of the exponents should tell you if we are dealing with a greater than one situation, or a less than one situation. For example 34y4̴72m531 must be greater than one, and 34m4̴72y531 must be less than one. However how do we distinguish between numbers that have only one exponent ? Well in these cases we would put a decimal point to the left of the numbers that are smaller than one. The decimal point symbol is a near-vertical dash(represented here by "/"). For example /34y4̴⁓ is a number smaller than one.

Note;- The numbers get there magnitude value from the letter and not the decimal point. Only if there is no letter, do they take there magnitude value from the decimal point. For example /34 would equal (3*8-1)+(4*8-2). Whereas /34y would equal (3*8-5)+(4*8-6).

And even bigger numbers

The two sets of exponent terms given above can be expanded somewhat to specify a bigger range of numbers. A symbol pronounced mua (written as the Seuna symbol for "m" with a small slash under it) representing 830 comes after the symbol pronounced hu. Other large exponents are generated in a similar manner up to a symbol pronounced hua representing 854.

And we can expand these terms even more. A symbol pronounced muan (written as the Seuna symbol for "m" with two small slashes under it) representing 857 comes after the symbol pronounced hua. Other large exponents are generated in a similar manner up to a symbol pronounced huan representing 881.

In a similar manner the small exponents can be expanded to 8-81. This is pronounced hian and written the same as huan.

Numbers outside the above ranges are not specified.

Fractions

a unit haba
a half haga
a third hada
a fourth hala
a fifth haca
a sixth hasa
a seventh haka

Ordinal numbers

Ordinal numbers are adjectives. They are formed by suffixing a d to the number. daba (first) for example, maybe thought of as a contraction of "da aba" = place one.

Nouns from numbers

klolo = wheel, klolaga = bicycle ?? kloli = vehicle ??

Negatives numbers

A negative is represented by putting "back/backwards" after the number.

Imaginary numbers

An imaginary number is represented by putting "side/sideways" or "rightside" or "leftside" after the number.

Mathematical operations

to is the word for "and" , and is placed between all words to be added. je is placed between words to be multiplied. Both to and je can be considered particles. They do have corresponding verbs however. tonda means "to add" or "addition", and jemba means "to multiply" or "multiplication".

Subtraction is just taken as addition invo;ving a negative number and division is just taken as multiplication with a fraction.

Index

  1. Introduction to Seuna
  2. Seuna : Chapter 1
  3. Seuna word shape
  4. The script of Seuna
  5. Seuna sentence structure
  6. Seuna pronouns
  7. Seuna nouns
  8. Seuna verbs (1)
  9. Seuna adjectives
  10. Seuna demonstratives
  11. Seuna verbs (2)
  12. Asking a question in Seuna
  13. Seuna relative clauses
  14. Seuna verbs (3)
  15. Methods for deriving words in Seuna
  16. List of all Seuna derivational affixes
  17. Numbers in Seuna
  18. Naming people in Seuna
  19. The Seuna calendar
  20. Seuna units