Help:How to display your conscript on the wiki: Difference between revisions
From FrathWiki
Jump to navigationJump to search
m (Typo) |
mNo edit summary |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 8: | Line 8: | ||
There are three or four steps to displaying your conscript into the wiki, and an optional fifth step (Click on the links for more detailed instructions): | There are three or four steps to displaying your conscript into the wiki, and an optional fifth step (Click on the links for more detailed instructions): | ||
<div style="max-width: 66%;"> | |||
:[[#1|1. Create an image of your conscript]]. Usually you will draw or write it, perhaps into a table prepared in a word processor and then printed out. | :[[#1|1. Create an image of your conscript]]. Usually you will draw or write it, perhaps into a table prepared in a word processor and then printed out. | ||
:[[#2|2. Get the image into a suitable computer image form]] if it isn't already. Usually by scanning it and postprocessing it in an image manipulation program. | :[[#2|2. Get the image into a suitable computer image form]] if it isn't already. Usually by scanning it and postprocessing it in an image manipulation program. | ||
:[[#3|3. Upload the image to the wiki]]. By clicking on the link "[[#Special:Upload|Upload file]]" in the left | :[[#3|3. Upload the image to the wiki]]. By clicking on the link "[[#Special:Upload|Upload file]]" in the ''toolbox'' sidebar on the left of the wiki page. | ||
:[[#4|4. Include the image into the wiki article]]. This is done using a variant of the ordinary syntax for wiki-internal links. | :[[#4|4. Include the image into the wiki article]]. This is done using a variant of the ordinary syntax for wiki-internal links. | ||
:[[#5|5. Optionally create a font for your conscript]] and make it available on the wiki. | :[[#5|5. Optionally create a font for your conscript]] and make it available on the wiki. | ||
</div> | |||
== | == {{anchor|1}} 1. Create an image of your conscript == | ||
If you are keen on being able to produce computer documents using your conscript you may want to create a font for your conscript, however this is a major undertaking in itself, and such documents are not very useful online, since you'd need to either get people to download and install your font, or to create PDF documents. | If you are keen on being able to produce computer documents using your conscript you may want to create a font for your conscript, however this is a major undertaking in itself, and such documents are not very useful online, since you'd need to either get people to download and install your font, or to create PDF documents. | ||
| Line 24: | Line 25: | ||
For someone who unlike me has fully functional hands and some drawing skills it is usually better to write/draw a paper document and scan it in step [[#2]]. | For someone who unlike me has fully functional hands and some drawing skills it is usually better to write/draw a paper document and scan it in step [[#2]]. | ||
Assuming you want a table of your conscript similar to the one I made of the Kijeb syllabary you would: | Assuming you want a table of your conscript similar to the one [[User:Melroch|I]] made of the Kijeb syllabary you would: | ||
:1.1. Create a table in your word processor, writing in everything that should be in Roman/print and leaving blanks for the actual glyphs. | :1.1. Create a table in your word processor, writing in everything that should be in Roman/print and leaving blanks for the actual glyphs. | ||
| Line 32: | Line 33: | ||
:1.3. Fill in the glyphs by hand with a fountain pen or an art/technical marker which gives a true line. You may want to first draw the glyphs with a faint pencil and fill them in with ink when you got them right, in which case the ink should allow you to erase the pencil without smearing the ink. This usually works fine with technical markers. | :1.3. Fill in the glyphs by hand with a fountain pen or an art/technical marker which gives a true line. You may want to first draw the glyphs with a faint pencil and fill them in with ink when you got them right, in which case the ink should allow you to erase the pencil without smearing the ink. This usually works fine with technical markers. | ||
:(When creating images of shorthand writing I actually | :(When creating images of shorthand writing [[User:Melroch|I]] actually wrote with a soft, black artists' pencil and scanned the result, which was quite satisfactory for that purpose and allowed for correction on the fly, although you will need a good plastic eraser to avoid smudge. Alas [[User:Melroch|I]] can't recommend any brands, since the good erasers sold here in Sweden are made in Germany, and probably not available or expensive in other places like the US.) | ||
== | == {{anchor|2}} 2. Get the image into a suitable computer image form == | ||
Scan your finished table. If you haven't got your own there are shops which will do it for you, and put it on a floppy or CD for you, or maybe email it to your computer. I have no idea what it may cost where you are (it is alas unrealistically expensive here, so if you haven't got your own scanner a friend who has one is the best option). | Scan your finished table. If you haven't got your own there are shops which will do it for you, and put it on a floppy or CD for you, or maybe email it to your computer. [[User:Melroch|I]] have no idea what it may cost where you are (it is alas unrealistically expensive here, so if you haven't got your own scanner a friend who has one is the best option). | ||
:2.1. Make sure the image file is in a good image format for your purposes. If the image contains few colors and biggish white areas, as is likely GIF is the best. PNG is good too, but transparent PNGs may print out as black boxes | :2.1. Make sure the image file is in a good image format for your purposes. If the image contains few colors and biggish white areas, as is likely GIF is the best. PNG is good too, but transparent PNGs may print out as black boxes under Windows {{-(}}. | ||
:2.2. Open your image(s) in an image editor (if you haven't got one The Gimp <www.gimp.org> is recommendable) and touch it up: 'gluing' parts together and getting into an appropriate size (usually larger than what should be displayed on the wiki page but not unreasonably large -- rather what would fit on a US Letter or A4, in practice 259 | :2.2. Open your image(s) in an image editor (if you haven't got one The Gimp <www.gimp.org> is recommendable) and touch it up: 'gluing' parts together and getting into an appropriate size (usually larger than what should be displayed on the wiki page but not unreasonably large -- rather what would fit on ''both'' a US Letter or A4: 210 × 279 mm (8.26 × 10.98 in), in practice the image should be at most 190 x 259 mm (7.48 x 10.1 in) if you want to allow a 10 mm margin on each side). There are more arcane things you can do to assure that white areas are really white, and black areas really black, but it takes some care and expertise to assure things don't get pixelly. | ||
== | == {{anchor|3}} 3. Upload the image to the wiki == | ||
== | == {{anchor|4}} 4. Include the image into the wiki article == | ||
== | == {{anchor|5}} 5. Optionally create a font for your conscript == | ||
:5.1. Get a font editing program. | :5.1. Get a font editing program. | ||
:5.2. Make the font available on the wiki. | :5.2. Make the font available on the wiki. | ||
Latest revision as of 09:17, 16 January 2007
There are three or four steps to displaying your conscript into the wiki, and an optional fifth step (Click on the links for more detailed instructions):
- 1. Create an image of your conscript. Usually you will draw or write it, perhaps into a table prepared in a word processor and then printed out.
- 2. Get the image into a suitable computer image form if it isn't already. Usually by scanning it and postprocessing it in an image manipulation program.
- 3. Upload the image to the wiki. By clicking on the link "Upload file" in the toolbox sidebar on the left of the wiki page.
- 4. Include the image into the wiki article. This is done using a variant of the ordinary syntax for wiki-internal links.
- 5. Optionally create a font for your conscript and make it available on the wiki.
==
1. Create an image of your conscript ==
If you are keen on being able to produce computer documents using your conscript you may want to create a font for your conscript, however this is a major undertaking in itself, and such documents are not very useful online, since you'd need to either get people to download and install your font, or to create PDF documents.
For someone who unlike me has fully functional hands and some drawing skills it is usually better to write/draw a paper document and scan it in step #2.
Assuming you want a table of your conscript similar to the one I made of the Kijeb syllabary you would:
- 1.1. Create a table in your word processor, writing in everything that should be in Roman/print and leaving blanks for the actual glyphs.
- 1.2. Print it out in as large a scale as your printer will allow (you may actually want to make several sub-tables and glue them together -- probably not literally, but afterward in an image editor).
- 1.3. Fill in the glyphs by hand with a fountain pen or an art/technical marker which gives a true line. You may want to first draw the glyphs with a faint pencil and fill them in with ink when you got them right, in which case the ink should allow you to erase the pencil without smearing the ink. This usually works fine with technical markers.
- (When creating images of shorthand writing I actually wrote with a soft, black artists' pencil and scanned the result, which was quite satisfactory for that purpose and allowed for correction on the fly, although you will need a good plastic eraser to avoid smudge. Alas I can't recommend any brands, since the good erasers sold here in Sweden are made in Germany, and probably not available or expensive in other places like the US.)
==
2. Get the image into a suitable computer image form ==
Scan your finished table. If you haven't got your own there are shops which will do it for you, and put it on a floppy or CD for you, or maybe email it to your computer. I have no idea what it may cost where you are (it is alas unrealistically expensive here, so if you haven't got your own scanner a friend who has one is the best option).
- 2.1. Make sure the image file is in a good image format for your purposes. If the image contains few colors and biggish white areas, as is likely GIF is the best. PNG is good too, but transparent PNGs may print out as black boxes under Windows ☹.
- 2.2. Open your image(s) in an image editor (if you haven't got one The Gimp <www.gimp.org> is recommendable) and touch it up: 'gluing' parts together and getting into an appropriate size (usually larger than what should be displayed on the wiki page but not unreasonably large -- rather what would fit on both a US Letter or A4: 210 × 279 mm (8.26 × 10.98 in), in practice the image should be at most 190 x 259 mm (7.48 x 10.1 in) if you want to allow a 10 mm margin on each side). There are more arcane things you can do to assure that white areas are really white, and black areas really black, but it takes some care and expertise to assure things don't get pixelly.
==
3. Upload the image to the wiki ==
==
4. Include the image into the wiki article ==
==
5. Optionally create a font for your conscript ==
- 5.1. Get a font editing program.
- 5.2. Make the font available on the wiki.
